Tennant T260 Manual Del Operador página 23

Squeegee Blade
Replacement
Each squeegee blade has four
sides. When the blade is worn,
you only need to exchange the two
ends of the blade and use the other
intact surface. If all four edges are
worn, replace the blade.
1. Remove the squeegee
assembly from the machine (as
shown below).
2.Unscrew the two yellow nuts on
the outside and turn them to the
top.Turn the squeegee over and
take out the blade (as shown in the
figure below).
Tennant T260 (10- 2023)
3. The blade is available on all
sides. According to the wear
condition of the blade, the blade
can be replaced in the left and right
directions for the first time to ensure
that the blade hole is aligned with
the buckle. After it is worn again,
the blade can be exchanged up
and down, the third time it can be
exchanged left and right, and then
the blade can be replaced. (As
shown below).
English
23