Sound/Display/Other Settings - JVC KD-AV41BT Manual De Instrucciones

Sound/Display/Other Settings

Only for KD-AV31. For KD-AV41BT, operate on the [Settings/Audio]
menu, or from the remote control (RM-RK259).
Select a preset equalizer (EQ)
Press EQ repeatedly to select a preset sound mode — [Flat] (default)/[Pop]/
[User]/[Techno]/[Rock]/[Classic]/[Jazz]/[Optimal]. (Corresponding sound
mode indicator lights up.)
Store your own sound settings
1
Press EQ repeatedly to select [User].
2
Press MENU to display the top menu screen.
3
Turn the volume knob to select [Settings], then press the knob to display the
setting menu.
4
Check that [ ] ([Settings/Audio]) is selected, then press the knob.
5
Turn the volume knob to select the item to set ([Bass]/[Middle]*/[Treble]),
then press the knob.
6 Turn the volume knob to adjust the value, then press T.
7 5 6
Repeat steps and to adjust the value for other settings.
8 Press G to exit.
The setting is stored to [User] in EQ.
• If no operation is done for about 10 seconds, the operation will be canceled.
• To return to the previous layer, press T.
* Only for KD-AV41BT.
[Settings/Audio] menu
Activate the bass boost
Press BASS BOOST. (BASS indicator lights up.)
• To cancel, press the button again.
Only for KD-AV41BT:
You can also activate/deactivate the bass boost on the [Settings/Audio] menu.
1
Press MENU to display the top menu screen.
2
Turn the volume knob to select [Settings], then press the knob to display the
setting menu.
3
Check that [ ] ([Settings/Audio]) is selected, then press the knob.
4
Turn the volume knob to select [Bass Boost], then press the knob.
5
Turn the volume knob to select [ON] (to activate) or [OFF] (to deactivate),
then press T.
6 Press G to exit.
• If no operation is done for about 10 seconds, the operation will be canceled.
• To return to the previous layer, press T.
Change the display brightness (Dimmer)
Press and hold DIMMER repeatedly to select [Dimmer Low] or [Dimmer High].
13
Continued on the next page
ENGLISH