Step 3
With the Speed Level in 1-5 position, press and hold the Speed Setting Button for 2
seconds, the device goes into the standby mode. Switch off the device completely by
moving the Power Switch to the OFF position.
• With the Speed Level in 0 position, no operation for 10 minutes, the device goes
into the sleep mode and the indicator light on the display turns off. Press the Speed
Setting Button again to restore the standby mode.
• The device will automatically turn off after 30 minutes of continuous use. It is subject
to the last operation. Please press the Speed Setting Button again for further use.
6. Warranty
THE WARRANTY EXCLUDES:
a. Damage caused by accident, abuse, mishandling, or transport;
b. Units subjected to unauthorized repair or disassembly;
c. Units not used in accordance with OPOVE instructions;
d. Damage exceeding the cost of the product;
e. Deterioration of the delivered product resulting from abnormal storage and/or
safeguarding conditions on the client's premises, and
f. Failure to provide the dated proof of purchase.
Some states and countries do not allow a limitation of damages, so the foregoing
limitation may not apply to you.
This warranty guarantees specific legal rights, and other rights may vary from country
to country and from state to state. This warranty service is available through the
operating policies and procedures of OPOVE Limited and all OPOVE international
distributors. If you are a client, please contact the appropriate OPOVE business entity,
dealer or retailer, from whom you directly purchased the product for warranty and return
authorization procedures. This warranty is initiated and executed by OPOVE Limited.
6