neno Luna Manual Del Usuario página 10

Press the „Mode" button until „Milk" lights up and the screen shows the
previously set temperature between 35°C and 60°C and the default time
of 24 hours. In this mode you can set the temperature between 35°C and
60°C using the corresponding buttons. The word „Milk" will light up 2
times, the device will make a sound and start heating. During heating the
display shows the current water temperature and the time of 24 hours
will be replaced by blinking rectangular lights. The unit will beep 5 times
to indicate when the set temperature has been reached and then when it
has been finished. The 24 hours are counted from the time the water is
heated to the set temperature.
d. Food: use this mode to heat semi-liquid foods and maintain the
temperature for up to 2 hours. Insert the basket into the steriliser, pour
in 160ml of distilled water and then insert the food bottle and replace
the lid. Press the „Mode" button until „Food" lights up and the screen
shows the previously set temperature between 30°C and 80°C and the
default time of 2 hours. The machine will beep five times to inform you
that it is finished.
e. Sterilization: Use this mode to sterilize bottles and teats. Place the basket
in the steriliser, pour in 40ml of distilled water and then insert the bottle
and/or teat and replace the lid. Press the „Mode" button until „Steam"
lights up and the screen shows a temperature of 100°C. „Steam" will
light up 2 times, the device will emit a sound and will start to heat. The
fixed time of this function is 10 minutes. In this mode, the temperature
and time cannot be changed. The device will beep 5 times to inform you
that it is finished.
f. Restart default settings: hold down the „Increase time/temperature" but-
ton in the device's sleep mode to restore the device to factory settings.
ATTENTION: Using water other than distilled water causes scale and
sediment accumulation and shortens the life of the device. The manufac-
turer recommends the use of distilled water.
06. SPECIFICATION
Power: AC 220-240V 400W | Recommended temperature and humidity for opera-
tion: 15-30 °C/ 30-80% | Weight: 580g | Dimensions: 12.6x13x30.5 cm
07. WARRANTY CARD
Dear Customer, thank you for purchasing our Neno Luna sterilizer and bottle
warmer. If you have any problems operating the unit under normal conditions,
please contact your authorised Neno brand service agent or distributor. Keep your
warranty card in case of repair. Product comes with a 24-month warranty.
Warranty conditions can be found on the website: https://neno.pl/gwarancja
10