Blackstone 2205 Manual De Instrucciones página 6

the griddle in place�
OWNER'S MANUAL | ASSEMBLY GUIDE
Place the griddle top onto the griddle body by aligning the
STEP 03
four pins to the holes of the body�
Make sure the front pins are
seated in the holes, then push
the griddle top back�
❶ ❶ Place the two front pins into
the front locking holes and push
the griddle top back�
❷ ❷ Then, set the two rear pins
into the rear holes�
Hang the grease cup in the slot on the back of the
STEP 05
griddle body�
Heavy pieces. Two people should assemble this appliance.
NOTICE
NOTICE
• DO NOT mix old and new batteries. Place appliance on a heat-resistant and flame-resistant
surface while in use.
• DO NOT mix alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, etc.) batteries.
06
❷ ❷
❶ ❶
CAUTIoN
Use the two (2) M6 bolts pre-installed in the handle to attach
STEP 04
the handle and bezels to the hood�
Proceed to USING YOUR BLACKSTONE�
STEP 06
NOTICE
Place appliance on a heat-resistant and flame-resistant
surface while in use.
Hot appliance. The cover/lid/hood MUST be open when the
appliance is in use.
Models: 2205 • 2205CA
CAUTIoN
BLACKSTONEPRODUCTS.COM/SUPPORT