Installation And Handling - LEMAN LOCSE300 Manual De Instrucciones

GB
- The device must not be used by an operator who is fatigued or under the influence of alcohol, drugs or
medication. For your safety, it is essential to have clear ideas.
- Do not use the device in the presence of liquid, gas or other flammable materials (natural gas, gasoline vapors or
other flammable vapors, wooden chips and sawdust, etc.)
- Do not use this device in a damp environment.
- This device should not be used in a bathroom or near a bathtub, shower, swimming pool, etc.
- Children in particular, unauthorized persons by the device in general, should stay away from the work area, and
should never touch the power cable and the device especially when it is running.
- Keep the device out of reach of children.
- Make sure before starting that the unit is in good condition.
- Do not use the device if the protective grille (1) is damaged or broken. Immediately unplug the machine from the
mains and have it repaired by qualified person. Never use the device without the protective grille.
- Place the device on the ground; it should in any case be positioned in height.
- Place the device on a flat, horizontal and hard surface. Be sure to constantly secure and stable positioning. If
dropped, there is a risk of injury.
- Never immerse the device. Never touch the device with wet hands. Never touch the device if you are in
contact with water or moisture. Danger of death!
- Do not cover in any case the device during operation. The unit produces heat and can cause burns and / or fire.
- Warning! Never place the device on a flammable surface (rugs, carpets etc.)!
- Warning! Keep a minimum distance of one meter between the device and any obstacles (walls, furniture, doors,
etc.).
- Never point the device towards flammable materials (curtains, wooden furniture, etc.).
- Connect the unit to a power outlet that meets the standards and specifications of the device: voltage and mains
frequency corresponding to those on the rating plate of the device, by differential circuit breaker, outlets properly
installed and controlled.
- This device protection I class: it must be grounded.
- This product should not be used with a voltage converter or with a timer: it must be turned on in the presence of
the user.
- Before connecting the device, make sure the function switch (4) is on the "Off" position (4a) marked O.
- Before using the machine, check the proper operation of the function switch (4): the unit must stop when you turn
the dial to position (4a) marked O.
- Do not modify the plug provided; if it does not fit the outlet, have the proper outlet installed by a qualified
electrician.
- Never move the unit while it is running: stop and unplug it before moving it.
- Make sure the device and the power cord never comes into contact with water.
- Always place the power cable away from the device.
- Handle the power cable with care, do not try to move the appliance by pulling on the cable, do not give a sharp
tug on the cable to disconnect it, keep it away from excessive heat, oil and sharp edges.
- Even if this unit is equipped with a disconnect switch on / off, unplug the appliance after use or when
unattended!
- Never open the electrical box. If this is necessary, contact a qualified electrician.
- Only qualified electricians are authorized to work on electrical equipment!
- Make sure the machine is unplugged before any maintenance, cleaning etc.
- Immediately after use, the device can be very hot: allow it to cool before handling.
- Maintain unit with care (see chapter 'Maintenance'), and make sure that all parts are properly installed and
tightened.
- Do not modify the parts of the machine.
- Any damaged parts should be repaired or replaced by an authorized repairing center.
- Do not use the device if an electrical device part is defective; do not make any changes to the electrical system.
The device must be repaired in an authorized repairing center.

INSTALLATION AND HANDLING

Unpacking:
- Open the packaging and carefully remove the device and all its components.
- Check that the delivery is complete and well for any missing item.
- Check that the device and its accessories have not been damaged during transport.
- Keep the packaging as much as possible until the end of the warranty period.
9