Publicidad
Idiomas disponibles
Idiomas disponibles
en-us Before using for the first time
Insert the milk system in the cover
13.
of the beverage dispenser.
Hook in the cover of the beverage
14.
dispenser at the bottom and snap it
in at the top.
Connect a carton of milk to the milk
15.
inlet tube and the suction pipe.
Note: Fill the water tank each day with
fresh, cold, non-carbonated water.
Tip: To keep the coffee beans at their
best, store them in a sealed container
in a cool place.
You can keep the coffee beans in the
bean container for several days
without them losing their aroma.
16
6.2 Checking the water hard-
ness
It is important to set the right water
hardness so your appliance indicates
in good time that it needs descaling.
You can use the enclosed test strip to
check the water hardness or ask your
local water company.
Briefly dip the test strip in fresh tap
1.
water.
Allow the water to drain off the test
2.
strip.
Read the water hardness off the test
3.
strip after 1 minute.
The table shows allocation of the
levels to the different degrees of
water hardness:
Level
Water hardness in gr/
gal (US)
1
1.0426 - 7.2985
2
8.3412 - 14.597
3
15.64 - 21.896
1
4
22.938 - 31.279
1
Factory setting
Note: Please use the test strip even if
you have a water softening system
installed as they generate different
water hardnesses.
Tips
¡ You can change the settings at any
time.
→ "Basic settings", Page 24
¡ If the water hardness is higher than
21.896 gr/gal (US), you can fill the
water tank with prefiltered water to
reduce limescale deposits in the
water tank.
Publicidad
