Publicidad
Idiomas disponibles
Idiomas disponibles
1
2
3
MONO
TUNER
BAND
SHIFT
Press TUNER/BAND
to select the FM or AM band.
When
TUNER/BAND
is pressed
while the power
is off, the
power is turned
on directly
(Direct
Play Function).
To select a band with the remote control
Press BAND while pressing
SHIFT.
Press TUNER
PRESET
repeatedly
to select the
manual tuning mode.
Each time the button
is pressed,
the following
three tuning
modes are selected
cyclically.
@
Preset tuning mode:
The preset number
flashes.
@
Auto search
mode:
"SEARCH"
is displayed.
@
Manual tuning mode:
"SEARCH"
is not displayed
and
the preset number
does not flash.
Frequency
SEARCIH
Preset number
m
The preset tuning
mode is skipped
if no station
is preset.
Turn MULTI JOG clockwise or counter-clockwise
to tune in to a station.
The frequency
changes
as you turn
MULTI
JOG. When
a
station
is received,
"TUNE
is displayed
for 2 seconds.
During
FM stereo reception,
((KIN)) is displayed.
To
search
for a station quickly
(Auto Search)
Press
TUNER PRESET repeatedly to display "SEARCH''(auto
search
mode),
and
turn
MULTI
JOG
clockwise
or
counterclockwise until the frequency starts to change rapidly.
After tuning
in to a station,
the search stops.
To stop the Auto Search
manually,
turn MULTI JOG a little in
either direction.
The Auto Search
may not stop at the stations
with very weak
signals.
MDOWN
and
-UP
are also available
to search
for a
station.
Keep
-DOWN
or M
UP pressed until the tuner
starts searching.
Press the button to stop the search manually.
When an FM stereo broadcast contains noise
Press
MONO TUNER
on the remote control while pressing
SHIFT
so
that "MONO
appears
on the display.
Noise is reduced,
although
reception
is monaural.
MONO
To restore stereo reception,
press
MONOTUNER
on the remote
control
while pressing
SHIFT so
that "MONO
disappears.
To
change the
AM tuning interval
The default
setting
of the AM tuning
interval
is 10 kHz/step.
If
you use this unit in an area where the frequency
allocation
system
is 9 kH.z/step, change
the tuning
interval.
Press
POWER
while pressing
TUNEWBAND
on the unit.
To reset the interval,
repeat this procedure.
When the AM tuning
interval
is changed,
all preset stations
are
cleared.
The preset stations
have to be set again.
H
DOWN
and M
UP are also available
to tune in to a
station.
7
ENGLISH
Publicidad
