Introduction; Overview; Equipment - ESAB Warrior 400i CC Manual De Instrucciones

2 INTRODUCTION

2 INTRODUCTION
2.1

Overview

The Warrior 400i CC/CV and Warrior 500i CC/CV are welding power sources intended for
MIG/MAG welding, as well as for welding with powder filled cored wire (FCAW-S), for TIG
welding, for welding with coated electrodes (MMA) and for arc air gouging.
The power sources are intended for use with the following wire feed units:
• Warrior Feed 304
• Warrior Feed 304w
ESAB's accessories for the product can be found in the "ACCESSORIES" chapter of
this manual.
2.2

Equipment

The power sources are supplied with:
• 5 m return cable with earth clamp
• 3 m mains cable
• instruction manual
0221323
- 55 -
© ESAB AB 2014