NOTE: If you reach the end of the rope length abruptly you could damage
the handle or rope spring and it wouldn't be covered by warranty.
NOTE: Do not let go of the handle after pulling to prevent the handle from
hitting the machine. Move your hand along with the handle until it has coiled
back completely.
6 Once the engine is started, wait for a few seconds and then turn the choke
completely to the left (RUN). This position opens the airflow and the engine will
begin to work stably. It will be ready to have equipment plugged in.
If the generator stops and doesn't start again, first verify the oil level.
NOTE: Do not leave the choke in an intermediate position, the blend would
be too rich and the engine would not work properly.
STARTUP HANDLE
CHOKE
10