Descargar Imprimir esta página

Beurer HC 60 Instrucciones De Uso página 20

Ocultar thumbs Ver también para HC 60:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 31
Note
• Your device is maintenance-free.
• Protect the device from dust, dirt and humidity.
• Do not clean the device in a dishwasher.
• Do not use any aggressive, caustic, abrasive or corrosive cleaning products or hard brushes.
• The casing of the hair dryer and the accessories may be cleaned with a soft cloth dampened
with warm water.
• Before each use, remove any flu , dust and hair from the air outlet
an appropriately sized brush.
7. WHAT IF THERE ARE PROBLEMS?
Problem:
The air flow does not
become warm enough
Automatic switch-on
function does not work
8. DISPOSAL
In the interest of protecting the environment, the unit must not be thrown out with the
household waste at the end of its service life. Dispose of the unit at a suitable local
collection or recycling point.
Observe the local regulations for material disposal.
Please dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and
Electronic Equipment).
If you have any queries, please contact the appropriate local authorities.
You can find out about collection points for your old units e.g. from the local municipal govern-
ment, the local waste disposal company or your dealer.
9. TECHNICAL SPECIFICATIONS
Weight
Voltage supply
Power consumption
Protection class
Ambient conditions
Permissible temperature range
Subject to technical modifications.
Solution:
Please check that the cold air setting is not activated
Set the device to standby mode (the LED should light up red).
Now grip the handle, and keep your hand closed around it. The
device should now switch on.
~515 g
220–240 V~, 50-60 Hz
1200-1400W
II
Only approved for indoors
-10 to +40°C
20
and the filters
2
11
using

Publicidad

loading