Bimar Elvis Folleto De Instrucciones página 9

appliance. The manufacturer declines all responsibility in case this is not safe working practices will
be respected.
• Before connecting the appliance, check that the voltage shown on the data plate matches that of
your electricity, and that the electric plug is grounded. In the event of incompatibility between the
electric outlet and the plug of the appliance, have the outlet replaced with another more suitable
type by professionally qualified personnel, who will make sure that the section of the wires of the
outlet is appropriate for the absorbed power of the appliance. In general, the use of adapters or
extension cords is not recommended; if their use is indispensable, they must conform to existing
safety standards and their current capacity (amperes) must not be less that the maximum of the
appliance.
• The power socket must be easy to reach so the plug can be removed quickly in case of emergency.
• Do not place the fan on a shelf and/or near sinks or other container of liquids (minimum distance
of 2 meters) to avoid the risk of it falling in.
• Keep the fan far away from fabrics (curtains, etc.) or unstable materials that could obstruct the air
intake grille; make sure that the front is free of unstable materials (dust, etc.).
• Make sure that the electric cord is not touching rough, hot or moving surfaces and not twisted or
wrapped around the appliance.
• Stand the appliance on a horizontal, flat surface or table; do not stand on a inclined plane (the
appliance could upset).
• Do not place the appliance near an open flame, cooking or other heating appliance.
• In the event of a breakdown or poor operation, turn the fan heater off and ask for professionally
qualified help.
1. Grid
2. Propeller
3. Handle
4. Motor cover
USE
Before using, check that the equipment is in good state, that the electric cord is not damaged. If the
power cord is damaged, it must be replaced by the manufacturer of its technical service, or by a
similarly qualified professional, to prevent any and all risk.
Insert the plug into the electric socket.
5. Oscillation button
6. Selector
7. Base
8. Clutch screw (tilt up/down)