Costway TQ10174 Manual Del Usuario página 14

Attach the Handle Bar & Front Bumper
● Turn the vehicle body over.
1. Fit the handle bar onto the end
of the steering column.
2&3. Line up the holes on the
steering wheel with the holes on
the steering column, insert the
M5x50 machine screw. Fasten a
nut on the opposite end of the
screw.
4. Fit the front bumper to the
vehicle body.
5. Insert two φ4x16 screws and
tighten with a screwdriver.
6. Wash your hands and wipe the
surface of the front bumper with a
clean dry cloth, place the label
exactly as shown.
14