REAR PANEL
35
1.- POWER INPUT: DC 12-18V, 500mA MIN
2.- MIDI THRU: Use to transmit MIDI data received on the MIDI IN connector
3.- MIDI OUT: Tran smit MIDI data orig inated by itself
4.- MIDI IN: Received MIDI data
5.- DMX OUT: DMX output
6.- DMX POLARITY SELECT: Select the polarity of DMX output
7.- AUDIO INPUT: line in music single.100mV-1Vpp
8.- REMOTE CONTROL: FULL ON and BLACK OUT are remote controlled using 1/4" stereo jack
OPERATIONS
1.- RECO RDING
1.- RECORD ENABLE
1) Press and hold RECORD KEY
2) Pres s FLASH 1 FLASH 5 FLASH 6 FLASH 8 keys in sequence
3) Release RECORD, the LED is lighting, recording is ready
2.- ERASE ALL PROGRAMS
1) Press and hold RECORD KEY
2) Press FLASH 1 FLASH 4 FLASH 2 FLASH 3 in sequence
3) Release RECORD
3.- CLEAR MEMORY
1) Press RECORD key, and then press REC CLEAR KEY
2) Release RECORD and REC CLEAR at a time
4.- RECORD PROGRAM
1) Set desired channel and record it
2) Light the relevant page led
3) Press RECORD then press appropriate FLASH
4) Release RECORD. For example: create aprogram,record it in the 28th SCENE
1) Clear memory
2) Light 1-24 SINGLE LED
3) set channel slider 1-24 to min. position and MASTER A to max. position. 4) move slider 1 to max. Position, press
RECORD then move it to min. Position. Continue moving other sliders until all sliders are set.
5) press PAGE key to lightpage 3 led.
6) press RECORD ,then press FLASH 16.
7) Rele ase REC ORD and FLASH 16, the program of 1-24 full on in sequence is recordedin the 28th SCENE.
16.
36
36
User Manual | TR-DMX24-2 by Triton Blue | June 2023 | www.triton-blue.com
38
39
40
41