Triton Blue TR-DMX24-2 Manual De Usuario página 20

NOTE: when sending file dump in open loop mode, you should set up receiving mode for the receiver, otherwise receiving
is dis able
7) When the power voltage is too low ,the display show LOP, now you should check whether the power is OK. It is
normal that LOP is appeared for a short while just after power is turned on.
20.- MIDI RUN
1) If MIDI data is not received with in 10 minutes,the channel and program turned on by MIDI will be cleared.
2) When sending orreceiving file dump, the device ID is 55H. All information(include System Exclusive)issentor
received infiledump. You can send SCENE program to storage or another unit, you can also receive SCENE
program from storage or another unit.
3) This unit sends or receives NOTE information ,relevant functions is as follows:
NOTE NUMBER VELOCITY
22-69 Master de program
70-93 Channel dimmer
94
95
96
97
98
99
100
101
102
20.
FUNCTION
TURN ON/OFF PROGRAM 1-48
TURN ON/OFF CHANNEL 1-24
FULL-ON
DARK
HOLD
TURN ON/OFF AUDIO CHASE
CHASES
DOUBLE PRESET MODE
SIGLE PRESET MODE
STEEP CHANGE
BLACK-OUT
User Manual | TR-DMX24-2 by Triton Blue | June 2023 | www.triton-blue.com
SCENES