Publicidad
Idiomas disponibles
Idiomas disponibles
11. Setup Menu
1.
During ON mode, press and hold the
button for 3 seconds to open the menu.
2.
Select the content with
3.
Change the initial values for each of the
settings with VOL +/- buttons.
4.
Press the
button
and exit the settings.
•
If no button is pressed within 10 seconds, the
system will automatically exit the menu.
Display
/
(press
)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
18
/
buttons.
Description
(press VOL + / - )
.
(
MOVIE,MUSIC,GAME,NEWS,
SPORT,NIGHT,AI）
Switch Surround Sound
[ON / OFF]
Adjust the Bass Level
Adjust the Treble Level
Adjust the Brightness
(Dimmer Level: DIM 0/1/2/3,
exit menu to take effect)
Switch Auto Wake
[ON / OFF]
Switch Auto Standby
[ON / OFF]
Switch Beep
[ON / OFF]
Set the Audio Delay
(AV SYNC)
Adjust DTS DRC Level:
DRC 0/1/2
Adjust DTS Dialog Control
Level: DCL 0/1/2/3/4/5/6
Switch: DTS Neural
[ON / OFF]
Switch: DTS Virtual:X
[ON / OFF]
Switch: BassBoost
12. Troubleshooting
To keep the warranty valid, never try to repair the
system yourself. If you encounter problems when
using this unit, check the following points before
requesting service.
No power
•
Ensure that the AC cord of the unit is
properly connected .
•
Ensure that there is power at the AC outlet.
•
Press standby button to turn the unit on.
Remote control does not work
•
Before you press any playback control
•
Reduce the distance between the remote
control and the unit.
•
Insert the battery with its polarities (+/-)
aligned as indicated.
•
Replace the battery.
•
Aim the remote control directly at the sensor
on the front of the unit.
No sound
•
M
a
e k
u s
e r
h t
t a
h t
or VOL+/– button to resume normal
listening.
•
Press
button on the unit or on the remote
control to switch the soundbar to standby
mode. Then press the
switch the soundbar on.
•
Unplug both the soundbar and the subwoofer
from the mains socket, then plug them again.
Switch on the soundbar.
•
Ensure the audio setting of the input source
(e.g. TV, game console, DVD player, etc.)
is set to PCM or Dolby Digital mode while
using digital (e.g. HDMI, OPTICAL,)connection.
•
The subwoofer is out of range, please move
the subwoofer closer to the soundbar. Make
sure the subwoofer is within 5 m of the
soundbar (the closer the better).
•
The soundbar may have lost connection with
the subwoofer. Re-pair the units by following
the steps on the section "Pairing the Wireless
Subwoofer with the Soundbar".
•
The unit may not be able to decode all digital
audio formats from the input source. In this
case, the unit will mute. This is NOT a defect.
The device is not muted.
e
u
n
t i
s i
n
t o
m
u
e t
d
P .
e r
button again to
EN
s s
Publicidad
