Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
WARNING!
Only vacuum cold ash!
Never vacuum or operate the unit near flammable liquids or gases.
WARNING!
Make sure that the container and all accessories are dry if previously used for
wet vacuuming.
Blower function only
The blower function helps blow dirt, dust or other materials, such as leaves, into a pile that
can easily be vacuumed up.
To use the vacuum as an air blower:
•
Remove the brush or crevice tool, if attached to the hose/tubes.
•
Align the arrow on the hose with the top of the air outlet. Push the hose into the air outlet
until secured in place.
•
Make sure the inside of the container is clean and remove the dust bag, if applicable.
Position the drain outlet cover and turn it clockwise to secure it in place.
•
The drain outlet must be fitted before using the vacuum cleaner.
Insert the plug into the mains socket.
To disassemble:
•
Make sure the unit is turned off and disconnect the plug from the mains socket.
•
Separate the brush, crevice tool, tubes and hose by twisting and pulling them apart.
Store the power cable and accessories as shown.
NOTE:
Wet vacuum only – Drain the dirty water immediately after you have finished
vacuuming (see the Cleaning and maintenance section).
Operation
Once the unit is assembled and plugged in, it is ready for use.
•
To turn on the vacuum, place the on/off switch in the I position.
17
EN
Publicidad
