Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Cleaning and maintenance
WARNING!
• Always unplug the USB connector from the power
supply before cleaning.
• Never immerse the unit in water or any other liquid.
• Detach all accessories from the main unit.
• Clean the unit with a soft, slightly damp cloth. Make sure that
no liquid enters the unit.
• When cleaning the unit, never use abrasive products, metal
brushes, scourers, wire sponges or sharp utensils.
• After cleaning, dry the unit thoroughly.
Cleaning the dust/water container and filters
• Clean the dust/water container and the filters whenever there
is a loss of suction.
Lift the lever and pull back the latch from the rim of the unit. Remove the vacuum lid.
Pull the foam or HEPA cartridge filter off the filter core.
Use water to clean the filters and wipe any dust off the filter core.
Naturally and thoroughly dry the filters before using them again.
Dry vacuum only
When the dust bag is full, remove it and dispose of it in a bin.
Wet vacuum only
Unscrew the drain outlet cover anticlockwise to empty the dirty water into an open drain.
• Wash with water.
• Dry it thoroughly before using the unit as a dry vacuum.
WARNING! To avoid damaging the unit, only use and insert
dry, intact filters!
• Reassemble all the parts in reverse order.
19
EN
Publicidad
