Publicidad
notch(fig.2). notch #1 (the notch to the far
left) is for the smallest vends and notch#5 is for the largest vends. If
desired, the adjuster plate can be removed entirely for vending large
products such as peanut M&M.
E)You need to use the 1-3/8"gumball wheel and brush plate for gumballs
or capsules. The gumball wheel is installed by first installing the riser
(Fig.3). The riser's opening must face the front of the vendor. Next, install
a gumball wheel So that one of the vending holes is positioned over the
opening in the riser. Install the gumball brush plate. Loosen the one (1)
adjustment screw on top of the gumball wheel located next to each
gumball cavity. Turn the adjustment wheel to adjust the opening
according to the vented product. The springs on the gumball brush plate
must be towards the coin mechanism or the front of the vendor.
2.To retrieve coins:
Open the coin box with the key and take out the coins
Note: do not over tighten the lock as only a snug fit is necessary.
If you have any questions about our product, please get in touch with our
customer service; thank you!
- 5 -
Publicidad
