Publicidad
Idiomas disponibles
Idiomas disponibles
3. LED and Beeper Indication
Successful Scan
Yes
Failed
Important Note:
When scanner make continuous beeps please configure the
channel for it. Refer to 'Configure Working Channel'.
Barcode Programming
Our barcode scanners are factory programmed for common
terminal
and
change
these
scanning the bar codes in this guide. An asterisk (*) next to an
option indicates the default setting.
Communication Mode
USB -KBW *
When
you
connection, you can enable the USB-KBW feature by scanning the barcode
below. It works on a Plug and Play basis and no driver is required.
Buzzer
One beep
Three beeps
Continuous beeps
communications
settings,
connect
the
USB -KBW *
Light flash once then OFF
settings.
programming
scanner
to
55
LED
Light On then OFF
Light OFF
If
you
need
is
accomplished
the
Host
via
to
by
a
USB
Publicidad
