Publicidad
Idiomas disponibles
Idiomas disponibles
FAQ
1. Some barcodes can not be read, why ?
a. Dirty or unclear barcodes might not be read.
b. Digital barcode displayed on phone, computers or tablets can't
be read by laser scanner.
c. The possible reason is that the configuration for some barcod e
types are not commonly used is off by default. You need to
activate a specific barcode type to get it to work. Please contact
the supplier that you've purchased it from.
2. The data can not be sent to my computer. Why?
a. Please make sure you have turned off the store mod e. It will
store your scans internally instead of instantly transmitting
them to the connected device. You need to scan the "Quick
Store Mode" barcode to send the scanned codes to your
connected device.
b. The scanner has disconnected with the USB receiver (It will
make 3 beeps when you scan the normal barcod e and d ata can
not be upload ed ). Follow Configure Channel to configure the
channel for the USB receiver.
3. How to solve the messy cod e problem encountered while
using other foreign languages?
The d efault language is English. Please refer to "Keyboard
language" to change the language according to your own needs.
4. Important Notes:
When scanner make 5 beeps, please charge power for the
scanner immediately, otherwise the scanner can not work under
low voltage .
Only apply for wireless scanner.
76
Rev.3
Publicidad
