Publicidad
Idiomas disponibles
Idiomas disponibles
5. Introduce the metal pin inside the hole that best fits with
the size of your wrist, owering the part with the flange at the
top.
6. Reconnect the strap and the pins refer to the other holes
with the thick end in the same direction, put it back into the
watch hole and then press the pins in completely with the
other end of the tool.
- To elongate the strap:
1. Repeat the same process but the other way around. Place
the strap piece with the arrow where it was before taking it
out.
2. Then, slide the metal piece inside the hole from which it
came out and in the same direction.
3. To make it slide in completely, use the round end of the
alignment tool as a hammer.
1.5 Charging
The Titanium smartwatch's full charge time is approximately
3 hours, and the battery can last up to 5 days depending on
the usage.
Use the 60 cm USB-A cable with magnetic charging base
that is included in the box to charge the smartwatch.
Connect the USB-A connector to a charger, computer
output or powerbank and place the magnetic base in a way
so that it properly sticks to the back part of the body watch.
1.6 Power on/off
To turn on the smartwatch long tap the dial button.
To turn off the smartwatch, press the dial button for 2
seconds. 2 options will appear: "SOS" and "Power off". Select
the "Power off" option and slide it to the right. You can also
shut down the watch by accessing the main menu and
tapping on the "Power on/off" button.
Publicidad
