Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Fault
Sprayer with weak spraying effect
The suction of the pen is weak
The output of high frequency is weak
© 2024 Weelko / www.weelko.com / Importer: Weelko Barcelona, S.L. /
Reason
1. The joining screw of the airbrush
with the spray bottle is not properly
tightened.
2. The water receptacle is blocked.
3. The air tube is worn out.
4. The connection between the air tube
and the suction handle is loose.
5. There is not enough water in the tank.
6. The hose is bent.
7. The vacuum is not connected.
1. The glass nozzle is not properly
placed.
2. The suction handle is obstructed.
3. The air hose is worn out, damaged, or
bent.
4. The connecting piece between the
air hose and the handle has loosened.
1. The electrode is not properly placed.
2. Wear of the electrode rod due to
excessive use.
ESB65397556
Solution
2. Adjust the spray level to a higher one.
3. Replace the water receptacle.
4. Replace the air hose with a new one
and adjust the connecting piece.
5. Check the water level in the bottle
and add more when necessary.
6. Connect both handles.
1. Adjust the spray level to a higher one.
2. Replace the suction handle.
3. Replace the air hose with a new one
and adjust the connecting piece.
1. Adjust the power to a higher level.
2. Replace the high-frequency
accessories.
Instruction Manual.
Instruction
Manual
6
Publicidad
