Descargar Imprimir esta página

Black and Decker FusionBlade PB22340-CL Manual Del Usuario página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

U S I N G T H E S M A L L G R I N D I N G G L A S S
1.
Add the ingredients. Do not fill the small glass more than half.
2.
Screw the blade unit white on top of the small glass.
3.
Place the small glass u pside down. Lower the
blade unit until it locks in the motor unit. Turn
the blade unit clockwise until it fits into the
motor unit. Press and hold the switch to start the
engine and stop pressing it to stop it.
4.
Turn the blade unit counterclockwise of the
watch to release it. Lift the small glass until it is separated from the motor
unit. Place the small glass in its normal position. Unscrew the blade unit.
Empty the contents of the small glass into an appropriate container to
contain the ingredients.
5.
Clean the small cup and the blade unit after of each use.
6.
To grind in a small glass, 30 seconds on and 10 minutes of cooling are
recommended.
Do not use the cup to hold ingredients: most ground ingredients can contaminate
the cup and blade unit if these components are not cleaned after each use.
Caution: Be careful not to mix the white blades of the small (grinding)
container with the black blades of the personal container.
H E L P F U L H I N T S A N D T I P S
• For best results, ingredients should be placed in the following order:
liquids, frozen ingredients, fresh ingredients.
• Place liquids in personal blending jar last. It is recommended to fill the jar
approximately ½ way with liquids.
• Do not overfill the personal jar. Keep the volume of ingredients at or below
the max fill of 600 ML, indicated on the glass.
• Cut large, hard fruits and vegetables into small 1/2-inch pieces.
• Do not chop or process foods such as cheese or meat in this blender.
• Do not process hot foods or hot liquids in this blender.
C A R E A N D C L E A N I N G
This product contains no user serviceable parts. Refer service to qualified
service personnel.
• Unplug the blender base before cleaning. Wipe the blender base using a
damp cloth. Do not immerse the blender base in water.
• Personal blender jar, blade assembly and personal lid are dishwasher safe,
recommended in top rack. All removable parts can also be washed in
warm water with dish soap. Rinse well and dry.
After cleaning, place the blade assembly on the personal blender jar to keep
the blade covered during storage.
PB22340-CL_30281_SE_IB_A.indd 10
PB22340-CL_30281_SE_IB_A.indd 10
10
12/4/23 6:33 PM
12/4/23 6:33 PM

Publicidad

loading