Publicidad
Idiomas disponibles
Idiomas disponibles
4. Changing pre-set programmes P1 to P7
You can change the pre-set programmes P1 to P7 to suit your pref-
erences. The appliance will remember the change once it has been
confirmed.
IMPORTANT: You must specify a setting for each hour of the day.
- When the appliance is operating in P mode, press the M and
buttons simultaneously for 3 seconds to access the page for modify-
ing the corresponding pre-set programmes.
- Press the + or - button to select the pre-set programmes you wish
to modify.
- Press
to confirm and enter the modification. At this point, the
number "00" will blink (00:59 means the first hour of the day, which
runs from 00:00 to 00:59).
- If you do not wish to change this time, press + to move on to the next
hour. Otherwise, press
to enter the operating mode modification.
- Press the + and - buttons to set the operating mode for the current
time. The corresponding operating mode logo will flash on the display
(only Standby, Comfort, ECO and Frost Protection modes can be se-
lected).
- Press
to confirm the selection and enter the next hour selection.
- The setting will be automatically confirmed if no action is taken for
10 seconds.
- During the setting, you can press M and
again simultaneously
for 3 seconds to exit the setting; and press M to return to the previous
step.
Rev 0_28 11 23
Made in China
Page 47
Publicidad
