Lorex Wired Pro A Serie Guía Configuración Rápida página 12

7. Attach the camera to the bracket by aligning the
tabs with the slots. Ensure the "PUSH" tab on the
bracket sticks out from the camera's release slot.
Slide the camera forward until it securely "clicks"
into place.
Note: To detach the camera from the bracket,
grip the camera firmly and push the "PUSH" tab.
8. Loosen the adjustment screw with a screwdriver
to position the camera, then securely tighten it
in place.
9. Important! Remove the vinyl film from the
camera lens for a clear view.
8
PUSH