Resol RTS Manual página 13

Note
The result of the measurement depends on the
temperature dynamics of the wall.
Note
Do not use the device in a flush-mounted box.
1.
Allocate a VBus ® address to the room control unit by me-
ans of the DIP switches (see chap. 2.2 DIP switches).
2.
Connect the room control unit to the controller via the
VBus .
®
3.
In the controller menu Inputs/Modules, select the sub-
menu RC and activate the desired room control unit cor-
responding to its address.
4.
Select the corresponding room control unit as a sensor in
the Room therm. menu.
Note
Terminal and menu designations may differ. Please pay
attention to the corresponding controller manual.
Note
If the device is commissioned for the first time, it can
take up to 1 min before the controller recognises the
room control unit.
13