Publicidad
Idiomas disponibles
Idiomas disponibles
USER MAINTENANCE INSTRUCTIONS:
The sprinkler bath can be controlled directly
from the set by means of on/off switch or
with the remote control.
SET CONTROL
The ON/OFF switch is on the back side of the (Fig.7).
You can find the ON/OFF on the back of the unit.
"0" : The device is switched off. Remote control won't work
"I" : The device will be turned on without using remote control and
will run at low intensity level. In this mode, you can still use the
remote control to adjust the intensity level and turn off the prod
uct.
"II" : The device is in stand-by mode and can only be operated by
the remote control.
The appliance switches off automatically after 20 minutes.
REMOTE CONTROL
This unit can be operated with the remote control by pointing the
remote control at the infrared sensor on the handle of the main unit,
and pressing the function button. Also, the remote control comes with a
suction cup on the back. Slightly wet the suction cup and press it firmly
to the bathroom wall or to the side of the bathtub.
Do not immerse the remote control in water.
Fig.7
Unit Side
www.SereneLifeHome.com
9
Publicidad
