Burigotto boavista spin Instrucciones De Uso página 47

4.12 Installation of Support leg
27 27
27
Notice:
1. Check and tighten ISOFIX attachment, Support leg and 5-point seat
belt system to ensure seat and child are firmly fixed.
2. The 5-point seat belt should not be twisted or wound.
3. When installing the car seat by rearward facing and children's height
is less than 75cm, it must use new born cushion.
4. We recommend to install car seat with ISOFIX attachment guider .
5. The seat must be as close to (against) the back of the vehicle seat as
possible
6. The child restraint system should not be installed in the position
where the airbag is installed in the rearward facing position.
The 100-150cm I-Size Booster
seat cannot use the Support leg.
1. Take the Support leg out from the
storage bin at the bottom of the base.
2. Press the expansion button to pull the
support leg out .
3. Place child in car seat and secure with
5-point seat belt system.
Notice: when the Support leg
touches the car surface, the
Support leg indicator must be all
green (as shown in the figure 27.
47