Publicidad
Idiomas disponibles
Idiomas disponibles
5. Installation method
5.1 Making rearward facing position by using ISOFIX
attachment+ Support leg (suitable for children height
from40-105cm).
28
28 28
Warning: This child car seat must not be used in a vehicle seat
where airbag has been activated.
29
48
1. When installing the child safety seat in
the rearward facing position, take the
Support leg out from the bottom of the
seat according to method 4-11 and then
rotate the seat to the rearward position
according to method figure 28.
Then according to method 4-9, installing
the ISOFIX attachment to the car seat
firmly.
Attention! If your child's height is less than
105cm, pls use rearward facing.
2. Press
the
29
29
adjustment button by your hand
and pull the Support leg down
until it touches the car surface.
3. Place the child in car seat and
secure with 5-point seat belt
system.
Attention: When the supporting leg
touches the car surface, the support
leg indicator must be all green (as
shown in the figure).
supporting
leg
Publicidad
