ctechi GT300 Manual Del Usuario página 17

CDSleep function:
USB-A, USB-C, LED lighting and cigarette light output interface when no load or power
less than lW, 3 minutes after will automatically turn off, enter standby mode, AC output
interface without load or power less than SW, 8 hours standby.
@Operation method:
After turning on the DC switch, press the LED switch while holding down the DC switch
and immediately release the LED switch and the DC switch, the standby icon is
disabled, that is, the standby function is disabled. Do the same to reactivate the
hibernation.
5. AC output function:
CDPress and hold the AC switch to AC mode. Connect the AC power plug to the
machine's power outlet to power the unit.
@The rated output power of the AC port is 300W and the electrical power at the output
end must be less than or equal to the rated power.
@When this product is charged or discharged, the air cooling system will start automat­
ically.
6. DC cigarette lighter output:
The rated output power of the DC cigarette port is 120W and the electrical power at the
output end must be less than or equal to the rated power.
Protection Mode for Short-circuit:
The device will trip automatically if there is a short circuit or overload of the GT300 or an
external device. In this case, unplug the output device and restart the GT300.
14