OUTPUT signal selection for SCART 3
This enables selection of the source to output from
SCART 3. For example, to record transmissions in stereo
from a stereo decoder – connect a stereo decoder to
SCART 1 and stereo media recorder to SCART 3, then
select EXT1 as the EXT3 output. The signal received
through SCART 1 will output directly through SCART 3.
In the SET UP menu press Q until
1
AV connection is highlighted, then press OK.
Press Q to highlight EXT3 output.
2
AV connection
HDMI1 audio
HDMI2 audio
EXT3 input
EXT3 output
Woofer
Audio output
Back
MENU
EXIT
Use S or R to change the EXT3 output option to:
3
Monitor = The picture on screen.
EXT1 = The picture from equipment connected
to SCART 1.
EXT2 = The picture from equipment connected
to SCART 2.
EXT5 = The picture from equipment connected to
the input sockets.
TV = The last television programme selection.
Input selection and
AV connections
Auto.
Auto.
S-VIDEO
EXT1
External
Fixed
Watch TV
continued
If the connected HDMI source does not support digital
audio, plug the audio cable into the back of the television
(as shown in the 'Connecting a computer' section), then
use the HDMI audio settings.
In the SET UP menu press Q until
1
AV connection is highlighted, then press OK.
Language
Country
Auto tuning
Manual tuning
Programme sorting
AV connection
Back
MENU
In the AV connection menu press Q to highlight
2
HDMI1 audio or HDMI2 audio. Using S or R
select Auto., Digital or Analogue.
HDMI1 audio
HDMI2 audio
EXT3 input
EXT3 output
Woofer
Audio output
Back
MENU
If the sound is missing select the alternative
setting.
HDMI, the HDMI logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC.
22
HDMI audio
SET UP
English
UK
OK
OK
OK
OK
Watch TV
EXIT
AV connection
Auto.
Auto.
S-VIDEO
EXT1
External
Fixed
Watch TV
EXIT
1/2