Atlas Copco LSK 37 Instrucciones Del Producto Original página 5

LSK 37
Vibration may be harmful to hands and arms.
Insert tools with a bent shank should not be used.
Use vibration damped tools when available.
Reduce time of exposure to vibration.
Inhalation of oil mist from exhaust may be harm-
ful, use only recommended lubricants.
Dust and fumes generated during operation may be
harmful.
Use spot suction or breathing apparatus.
See also EN 626.
Maintenance
Follow instructions for lubrication, cleaning and
overhaul given in the written instructions supplied
with the machine.
Make sure that service personnel are trained.
Take special care concerning dismantling and as-
sembly of speed governors and overspeed shut off
devices.
Always check the free speed after service.
Use genuine Atlas Copco replacement kits and
parts only.
Warning
Make sure you are familiar with the operating in-
structions before you use this machine.
This machine, its attachments and accessories must
only be used for the purpose for which they were
designed. Never use mounted wheels or grinding
wheels.
For product liability and safety reasons any modi-
fication to the machine, its attachments or acces-
sories must be agreed in advance with an autho-
rized technical representative of the manufacturer.
© Atlas Copco Industrial Technique AB - 9836 099301 01
To prevent personal injury and long time risks:
• Familiarize yourself with the enclosed leaflet
"General Safety Instructions for Die Grinders".
• Before making any adjustments to the machine,
e.g. changing an accessory, please ensure that
the air supply is disconnected.
• Check the free speed of the machine at regular
intervals and whenever the machine has been
serviced. This check should be carried out with
the grinding equipment detached.
The maximum permissible speed as marked on
the machine must not be exceeded.
• The cutting tool must be approved for the rated
speed of the machine.
• Avoid finger injuries – if the extraction ports
of the machine are clogged, switch the machine
off and allow the cutting tool to come to a com-
plete halt before removing the chips.
General information
EC DECLARATION OF CONFORMITY
We, Atlas Copco Industrial Technique AB,
S-105 23 STOCKHOLM, SWEDEN declare that
the product (with name, type and serial number,
see front page) is in conformity with the following
Directive(s):
2006/42/EC
Harmonised standards applied:
EN 792-9
Technical file available from:
Quality Manager, Atlas Copco Industrial Tech-
nique, Stockholm, Sweden
Stockholm, 1 July 2013
Tobias Hahn, Managing Director
Signature of issuer
Installation
Installation of vibrating tools
It is recommended that a minimum length of 300
mm of flexible hose for compressed air is inserted
between a vibrating tool and the quick-action cou-
pling.
Safety Information
5