Xavant STIMPOD NMS 450 X+ Guia De Inicio Rapido página 6

You Choose: Patient Stimulation Options
Option A: OneTouch NMT (AUTO Mode)
1 Start Case
Select START CASE
Toggle case
recording On/Off. to initiate Auto
RECORD ID: P0000
CLOSE START CASE
Option B: Manual Stimulation
1 Press the Mode button to
select mode
Cleaning and Disinfecting
Cleaning: Soap and water, applied with a damp cloth is suitable to clean and disinfect the STIMPOD. It is imperative that no moisture penetrates the STIMPOD.
Disinfecting: Any commercially available methanol-free disinfectant in an ethyl alcohol base can be used for disinfection.
6
Stimpod-NMS450XPlus-QSG-XM400-21QSGP04-02-A5.indd 6 Stimpod-NMS450XPlus-QSG-XM400-21QSGP04-02-A5.indd 6
2
Full Case Monitoring Initiated
Reference current and Depth of Block
automatically determined and monitored.
mode.
RECOVERED
Or
2
Select Stimulation Mode
Select TOF mode.
Confirm mode
selection.
CANCEL CONFIRM
3
Select Desired View
Swipe to navigate through the available waveforms/views
RECOVERED
3
Adjust current as required
Adjust using scroll wheel
Press Enter
Or
Adjust using STIMULATION CURRENT
Or
touch display
CANCEL CONFIRM
for Patient NMT Monitoring
MINIMAL
RECOVERED
4
Press Play to Initiate Stimulation
Press Play key
Short Press for Single Stimulation
Or
Long Press (>2sec) for Repeat Stimulation
06/12/2023 3:08 PM 06/12/2023 3:08 PM