Publicidad
Idiomas disponibles
Idiomas disponibles
2.
Remove the mounting screws and spacer with a 5/8 Inch (15mm) wrench or socket.
3.
Carefully detach the blade(s) and fan.
4.
Inspect the fan, blade bolts, and base for any damage.
5.
Examine the motor shaft to ensure it is not bent or damaged.
Install the New Blades
NOTE:The blade configuration of this mower is customizable. Dual blades provide the best cutting
performance, while single blade offers extended runtime.
1.
Reinstall the fan, followed by the new blade(s) (Dual blade: upper blade followed by mulching blade) positioning
the angled ends of the mulching blade upward toward the cutting cover.
*Dual blade order: Install upper blade (flat) then mulching blade
*Single blade order: Install the mulching blade only
2.
Ensure that the keyed holes on the blade(s) align with the indentations on the fan.
3.
Insert screws to tighten the blades.
4.
Secure the blade using a wooden block for stabilization. Insert the spacer and tighten the mounting screws to
the recommended torque 25.8 ft.-lbs. (35 N.m.).
English
15
EN
Publicidad
