frequently asked questions and answers
COMMON PROBLEMS
Can this product keep warm
overnight?
What is the best water
temperature for the baby
to drink?
Why is the heating time
different depending on the
room temperature?
Can I use this product to
heat up during charging?
cleaning
Follow these steps for cleaning:
1.
After use, hold down the power button for 2 seconds to turn off, disconnect
the USB charging cable and cover the USB port.
2.
Clean milk or water residuals from the steel heating part.
3.
Do not submerge the product in water to clean it.
4.
During the cleaning process, make sure to clean and dry the silicone seal ring.
MAINTENANCE METHOD
1.
The longest working time for keeping
warm is about 9 to 10 hours for 120 ml milk
keeping at 40ºC and this keep warm time
is based on full charge of battery. If you
need to keep the water warm overnight,
we recommend keeping the bottle warmer
connected with the charging cable.
2.
It is recommended to keep the milk warm
for no longer than half an hour as any
longer time destroys the nutrients essential
for the baby's health.
1.
For mixing protein powder/probiotics it is
between 37-45°C.
2.
To mix the milk powder in the water it is
between 40-50°C.
The lower the ambient temperature, the lower
the starting point and the longer the heating
time. On the contrary, the higher the ambient
temperature, the shorter the heating time.
The heating function can be used normally
during the charging process but you need to
make sure that the charge is not less than 40%.
This is to prevent the appliance from turning off
before reaching the set heating temperature.
21