Forest-Master FM5D Manual Del Usuario página 36

36
5. Attach the rear legs(1) to the wheel carriage
of the log splitter. The axles of the carriage go
through the large holes in the legs. Secure them to
the sides of the wheel frame using the 2 M8x20
cap head bolts(6) and two M8 nuts(7). Insert the
bolts through the hole in the leg flange and the
hole in the side of the wheel carriage. The nuts go
inside the wheel carriage.
6. Slide a leg clamp(13) onto each rear leg and
secure by tightening the M8 bolt. The leg should
be slid through the clamp tube with just a single
nut welded on.
7. Attach an axle bar and wheel assembly
to the rear legs using 2 of the M8 x 35
Allen bolts(9) and 2 M8 nuts (7). Note
that the bolt should be inserted through
the larger hole in socket.
FM5, FM8 & FM10 (Versions D, T & TW)