Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 2: START TIME
1) Turn dial to "START TIME".
2) The default outlet is zone 1. When hour-number is flashing, use
"+" and "-" buttons to adjust it, and then press "OK" button to
confirm.
3) Then minute-number would flash, use "+" and "-" buttons to
adjust and use "OK" to confirm, then start time for zone 1 has
been finished.
4) Press "Zone" button to switch to zone 2, and same operation
to adjust and confirm start time for zone 2, then zone 3 and
zone 4.
Tips:
1) When both numbers stop flashing, press "+" or "-" can resume
flashing status.
2) Have no plan for a zone, press "Zone" button again to skip it.
3) Press and hold "+" or "-" button for 3 sec can adjust number
quickly.
Note:
Only one valve could work at a time.
To ensure the outlet water volume and water pressure, only one
valve could work at a time, even if they have same start time.
Please go to page 17 to learn the running logic of the valves in
each zone of the timer.
-09-
Publicidad
