Publicidad
Idiomas disponibles
Idiomas disponibles
Ambient
operating
and
temperature for the tool and battery
pack
(Product performance may drop below
0°C)
Recommended ambient charging
temperature
Recommended battery type
Recommended charger
Know Your Product
See page 3.
1. LED light
2. Anvil
3. Trigger switch
4. Handle, insulated gripping surface
5. Control panel
6. Battery pack
7. Belt clip
8. Direction of rotation selector
9. Unlock button
Intended Use
The product is intended for driving in and loosening screws and bolts
as well as for tightening and loosening nuts within the respective range
of dimension.
The light of this power tool is intended to illuminate the power tool's
direct area of working operation and is not suitable for household
room illumination.
For damage caused by usage other than intended, the user is
responsible.
W-Connect
Functionality depends on the region in which the product is sold.
The power tool is Bluetooth® enabled.
The following products are required to use the W-Connect functions:
□ Mobile device
• Android 6.0 and higher
• iOS 11 and higher
□ ORSYonline/W-Connect app
□ M-Cube W-Connect battery
□ W-Connect module
□ Power tool which is W-Connect compatible
Refer to the respective user instructions of each individual product.
Inserting the W-Connect Module
See page 4.
□ Remove the dummy module from the battery pack.
□ Insert the W-Connect module (WCM-BT) into the battery pack.
storage
-15 – 40°C
5 – 40°C
LI 18V/2 Ah BASIC
LI 18V/4 Ah BASIC
LI 18V/5 Ah BASIC
LI 18V/5Ah
W-CONNECT
ALG 18/4 BASIC
ALG 18/6 FAST
Installing the Mobile App
□ Download the ORSYonline/W-Connect app from your App Store
or Google Play Store.
□ Follow the instructions in the app to complete registration before
using the W-Connect functions of the power tool and battery
pack.
The W-Connect module sends a signal to the ORSYonline/W-Connect
app at regular intervals. Depending on the environment, the signals
may be disturbed.
If a connection to the power tool is not possible, check the following:
□ Module insertion
Make sure that the module is inserted into the battery correctly.
□ Distance
Reduce the distance between the mobile device and power tool
and try again.
□ Mobile device
Check and make sure that Bluetooth® is enabled on your mobile
device.
W-Connect Functionality
The W-Connect module supports the following functions:
□ Asset management
□ Services
□ Location determination (last known location)
□ Completeness check
LEDs
LED light on the product
When a protection mode is triggered, the LED light on the product
blinks for 10 seconds. Release the trigger and restart the product.
Battery LED Indicators
Refer to the following blinking codes of the LED indicators on the
W-Connect battery pack.
Blinking
pattern
Frequency
2 times per second
Status and
The battery pack is out of the required
action to be
temperature range. Allow the battery pack to rest
taken
until its temperature reaches between -15 °C and
+40 °C.
Blinking
pattern
Frequency
2 times per second
Status and
The tool is out of the required temperature range.
action to be
Allow the tool to rest until its temperature reaches
taken
between -15 °C and +40 °C.
Blinking
pattern
16
Publicidad
