Publicidad
Idiomas disponibles
Idiomas disponibles
CONTROLS & FUNCTIONS
INPUT CHANNEL
1. MIC/LINE INPUT
Accepts both XLR and TRS connectors. Connect the
microphone or instrument you intent to use.
2. Mono/Stereo input jacks
[MIC] Balanced XLR microphone input jack.
[LINE(L/R, R)] Unbalanced TS type line stereo input
jacks.
3. Stereo input jacks
TS type
RCA type
[LINE(L/R,)]/[LEFT, RIGHT] These are stereo input
jacks (unbalanced input) for connecting line level
instrument, such as electric keyboards and audio
equipment. Two jack types are provided: TS type
and RCA pin type.
Note: on any channel, you may use either a TS or
RCA jack, but not both.
4. Phantom +48V switch and indicator
Turn this switch on to supply DC +48V to the XLR
input.
Be sure to leave this switch off if you don't need
phantom power
5. PAD Switch
When this switch is turned on, the input signal from
[MIC/LINE] of the mono input channel is attenuated
by -15dB.
6. PEAK indicator
The peak level of the post-EQ signal is detected, and
the PEAK indicator lights yellow when the level
reaches 3dB bellow clipping.
7. Stereo INPUT and MP3 player signal switching
Push this switch up, the signal is switched to stereo
input (CH11/12, CH15/16), push this switch down the
signal switches to USB MP3.
4
Publicidad
