Publicidad
Idiomas disponibles
Idiomas disponibles
THE MENU STRUCTURE
Address
Channel
Slave
Auto
Fade
Color
Sound
Red
Green
Blue
Amber
White
UV
Strobe
Dimmer
Screen
Infrared
Wireless
MMD
ID Set
TROUBLESHOOTING
This short guide is meant to help and try to solve simple problems, if they continue and the device cannot
operate, please, don't try to repair it by yourself, return the device to your MARK dealer.
If a problem occurs, carry out the following steps in sequence until find solve the problem. If the light
effect does not operate properly, refer servicing to a technician.
No Light
Response: Suspect two potential problem areas: the power supply or the LEDs.
1- Power supply. Check that the unit is plugged into an appropriate power supply.
2- The LEDs. Return the device to your MARK dealer.
3- Check if the fuse is not blown, if it is, change it with one that keeps the same technical features. If
once the fuse is ok the device again blown it, please, don't change it again, contact the MARK
technical service.
Address Setting 001 - 512
4 Channel Modes of 3 / 6 / 8 / 11
Slave/Master
Auto Chase Speed from 1 to 15
Auto Fade Speed from 1 to 15
Preset Colors from 1 to 32
Sound Active Sensitivity from 1 to 10
Manual Red Dimmer from 000 to 255
Manual Green Dimmer from 000 to 255
Manual Blue Dimmer from 000 to 255
Manual Amber Dimmer from 000 to 255
Manual White Dimmer from 000 to 255
Manual UV Dimmer from 000 to 255
Strobe from 1 to 15
4 Dimming Curves of 1 / 2 / 3 / 4 (Linear, Curve, Theatre, Studio)
Set OLED display to turn off after 30 seconds.
Enable/ disable infrared Remote Control
Enable/ disable Wireless DMX function
Manual Master Dimmer from 000 to 255
ID Setting from ID00 to ID15
8
Publicidad
