Publicidad
Idiomas disponibles
Idiomas disponibles
Outdoor Sofa Swing WPC Assembly Instructions
4) Assembly
Step 3
Now the drill is prepared. Place the depth stop ring on the drill. Align it so
that the drill bit protrudes by 2 cm and tighten the stop ring with the
hexagon socket.
(Tip: Insert the drill bit into the cordless screwdriver up to the stop so that
the stop ring cannot slip during drilling).
Step 4
Position the first slat flush with the top edge of the frame.
The slat must protrude by 22 cm beyond the outermost edge of the frame
on both sides.
(Tip: Secure the top slat with a screw clamp to hold it in position. To avoid
damaging the slats, use a screw clamp with a rubber coating or, for
instance, a piece of cardboard as an intermediate piece).
-15-
Publicidad
