cecotec CITY URBAN Manual De Instrucciones página 7

roads.
- Always remove the battery during maintenance.
- Do not modify or tamper with the electrical management
system of the electric bicycle.
- Warning: After prolonged use, use caution when touching
hot surfaces such as disc brakes.
- The electric city bike has been specifically designed for use
in urban environments and on flat surfaces. It is designed to
provide electric assistance in this type of terrain and enhance
the driving experience in urban environments. However,
it is important to note that incorrect use of the E-bike can
present potential risks and hazards. The following dangers
of incorrect use are warned against:
- Risk of loss of control: In urban environments, conditions
such as heavy traffic, pedestrians and unforeseen obstacles
may exist. It is crucial to handle the electric bike with caution,
respect traffic rules and use proper riding skills to avoid loss
of control and possible accidents.
- Risk of overheating: in urban conditions, the continuous
and prolonged use of the electric assistance system
can generate heat. It is important to monitor engine and
battery temperature to avoid overheating. If a significant
temperature rise is detected, it is recommended to stop and
allow the system to cool down before continuing.
- Risk of premature wear and tear: the frequent use in urban
environments can subject the electric bicycle to increased
wear and tear. Regular inspections of the E-bike and its
components are recommended, paying attention to signs of
wear and tear, damage, or weaknesses. Replace any worn or
damaged components immediately to maintain the safety
and optimum performance of the urban E-bike.
- Remember the importance of using your electric city bike
12
CITY URBAN/ CITY URBAN PRO
responsibly and appropriately to ensure a safe and enjoyable
riding experience in urban environments. Always comply
with traffic regulations and adopt a cautious approach when
driving on busy streets and roads.
- Always wear a suitable bicycle helmet and ensure that it
is correctly fitted. The use of helmets is of vital importance
to safeguard the integrity of the head in case of falls or
accidents.
- Periodically check the brakes to ensure that they are
functioning properly. Check brake pads for wear and tear
and adjust if necessary. Brakes in good condition are
indispensable to ensure efficient braking ability.
- Check tyre pressure regularly. Ensure that the tyres are
inflated to the recommended pressure. Underinflated tyres
can affect the stability and performance of the bike, as well
as increase the risk of punctures.
- Inspect the steering of the bicycle and ensure that it is
properly adjusted. Check that there is no play and make
sure that it rotates smoothly without hindrance. Loose or
defective steering can compromise control of the bicycle.
- Regularly check tyres for damage or deformation. Ensure
that they are in good condition, with no cracks, dents or other
problems that could compromise their structural integrity.
- Use caution with braking distances in wet conditions.
Remember that brakes may be less effective on wet
surfaces, so increase braking distance and reduce speed in
wet or slippery conditions.
- It is vital to use original spare parts for safety critical
components. These parts are specifically designed for your
electric bike; they meet the appropriate standards and
guarantee optimum performance and safety. The use of
non-original parts may compromise the safety and function
13
CITY URBAN/ CITY URBAN PRO