VEVOR SGPC2000W-121 Manual De Operación página 7

machines and other original equipment available electricity.
When you use a pump type of load, choose one that has a capacity
greater than more than double the load capacity, and double-check that
the load power you want to use is less than one time the power of our
product.
The inverter is a power device that can convert direct current (storage
batteries, solar cells, wind energy) into alternating current, and the inverter
uses high-frequency power conversion technology and uses a ferrite
transformer instead of the old bulky silicon steel transformer. That's why
our power inverters are lighter and smaller than other inverters of their kind.
In inverter mode, the output waveform is a sine wave. (See Figure 1).
1.Using Environment.
For best use, place the inverter on a flat surface, such as the ground,
car floor, or other solid surfaces where the power cord of the inverter can
be easily fixed.The workplace should meet the following conditions:
Keep it dry, do not let the inverter come into contact with water or other
liquids, keep the inverter Keep away from moisture or water.
Cool environment with a temperature of 0 degrees Celsius To 50 degrees
INTRODUCTION OF PERFORMANCE
Figure 1: Output sine waveform
- 5 -