VEVOR SGPC2000W-121 Manual De Operación página 9

Battery connection diagram.(See Figure3)
Installation connection steps.
Please refer to the wiring diagram in Figure 3.
1. First of all, turn off the inverter power.
2. Use a black DC cable to connect the negative pole of the battery to the
black binding post head of the inverter.
3. Use the red DC cable to connect the anode terminal of the battery and
the red post head of the inverter.
4. Plug the electrical devices into the output socket of the inverter.
5. Turn on the inverter switch.
6. Put the AC cable into the grid input socket.
The inverter can use one or more batteries, but it is best to use one or
more batteries Batteries with a capacity of 150AH or above.
Please use the cable sold with the inverter to connect the inverter and
the battery;The red cable connects the anode terminal of the battery and
the red stigma of the inverter,The black cable connects the negative
terminal of the battery and the black stigma of the inverter. Please make
Figure3
- 7 -