geberit ACO 203 Manual De Operación página 28

EN
ATTENTION
Damage to the device due to incorrect
rechargeable battery
▶ Make sure that only suitable Geberit
lithium-ion batteries of type
Milwaukee 18 V are used.
5
Slide the rechargeable battery into
the pressing tool from below until the
battery fastens into place.
Result
✓ Pressing tool is in idle state. No LED is
lit.
28
Pressing with Geberit
pressing attachments
WARNING
Risk of injury caused by flying
fragments
▶ Wear protective goggles and
a protective helmet.
WARNING
Risk of injury caused by the
use of incorrect pressing
attachments
▶ Only use pressing
attachments that correspond
to the diameter of the
pressfittings to be
processed.
WARNING
Risk of fire from heat build-up
▶ Allow the pressing tool to
cool down for at least
30 minutes after 30 minutes
of continuous operation.
▶ Do not place or store the hot
pressing tool near easily
flammable materials.
The pressing procedure can be
cancelled at any time. → See
Cancelling the pressing procedure.
90071994442300555 © 12-2023
968.361.00.0(03)