ALTIVS APX Manual De Instrucciones Y Seguridad página 5

Home Screen diagram
1 2 3 4 5
10 9 8
1 Surrounding temperature 7 Power remaining(Note:The indicator
will turn red when remaining power is
2 Current speed(Indicated by red
5% or less)
outline
8 Compass bearing and degree
3 Speed Limit（Preset by user but also
affected by remaining battery 9 Current depth
4 LED light 10 Depth limit (Note:The indicator will
turn red when current depth matches
E-compass
5
matches the depth limit set up user
6 SublueGo App connection indicator
Digital interface overview
6
1. Press L+R for 5s and the machine will begin initializing. You will see
the below screen, wait a few seconds necessary for ALTIVS to boot.
2. You will be provided a Legal Notice, please read creafully prior to
continuing.
7
Use L/R to navigate through the languages. Make sure you
understand and agree to everything in the notice. Press T
5
3. You will land in the Home Screen, per the above diagram. Use L/R to adjust the
current speed you are running at (within the set limit). The default depth limit is
2m and all 4 speeds are available. You may adjust these limits in the Menu.
Press and hold T +T together to run the motor.
L R
Use button to turn LED lights on and off
4. Hold L+R for 3s to access the Menu. Firstly the Speed Limit screen will be
shown. Use L/R to increase/decrease the current speed setting. Use T
return to Home or press T
to accept
R
5. Next you will enter the Depth Limit setting. The available increments are 2m,
5m,10m, 20m, 30m and finally 40m is the highest possible. Use L/R to increase
and decrease the limit.
Use TL to return to the Power Limit setting and T
page
6. Once landed on the Power Off page, you may press R to switch off the unit,
to press T to return to Depth Limit setting or press T
L L
to proceed to Depth Limit setting Home Screen will reflect the setting changes that were made in the Menu.
R
6
EN
to proceed to the Power Off
R
to return to Home Screen.
R