Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Open the silicone cover and fill the water tank through the filler opening.
Note: If you have hard water, it is advisable to use only distilled or 50% demine-
ralised water and 50% hard water. Also make sure that you do not use chemically
decalcified water or perfumed water.
4.
Plug the iron into a properly connected socket.
5.
Set the desired temperature using the rotary temperature switch and wait
until you hear a light „click" sound.
6.
Caution! Before using the iron with a steam function for the first time, we
recommend that you operate it horizontally for a moment, away from your
iron.
7.
When the ironing process is finished or you take a break from ironing, plea-
se bring the iron into an upright position and place it on the stand.
8.
Disconnect the iron from the power supply. Pour off the remaining water
and allow the iron to cool down completely.
Emitting a blast of steam
A steam burst provides additional steam to remove stubborn creases.
1.
Set the temperature dial to the „max" position (●●● ). Wait until the status
LED goes out.
2.
Move the iron to the desired position and press the steam button. Wait
a few seconds for the steam to penetrate the fibre before pressing the
button again.
Note: For the best steam quality, do not use more than three consecutive bursts
of steam. Excessive use of this function will cause the iron to cool down.
English
23
Publicidad
