Publicidad
Idiomas disponibles
Idiomas disponibles
Introduction
Thank you for purchasing this Atlantic Eco-Blox Water Matrix Block. Before using this block
please take a moment to review this manual. Eco-Blox provide are the fastest, easiest way
to create weight-bearing underground water storage reservoirs. With 96% void space
available for water storage, Eco-Blox save time and labor by reducing the size of the
reservoir needed.
Assembly
1. Begin assembly by placing one large panel in on the ground. When assembly is
complete this panel will become the bottom of the Eco-Blox.
2. Locate the short side of one of the four small support panels. Insert the slide lock
tabs of the short side into one of the four receiving channels and slide until the panel is
snug. Line up the next three panels in the same way. Do not worry about perfect
alignment of the panels; the panels will be aligned last.
3. Take another large panel and line up the channels with the tabs on the four small panels.
Push in to engage the tabs then slide the large panel down until it makes contact with
the bottom panel.
4. Repeat for the other large side panel. Be sure all tabs are properly inserted into their
respective channels. Verify the side panels are even with the tops of the four
small panels.
2
Publicidad
