ARX WAVE Manual Del Usuario página 18

The factory preset values are as follows:
5.0-6.0 Volts.............88 Hz.
6.1-7.0 Volts............102 Hz.
7.1-8.0 Volts............117 Hz.
8.1-9.0 Volts............131 Hz.
9.1-10.0 Volts..........146 Hz.
10.1-11.0 Volts.......160 Hz.
11.1-12.0 Volts.......175 Hz.
Reset to factory values
A full reset of the power supply can be performed, affecting all 3 modes, by pressing the
for 3 seconds immediately after turning off the power supply.
You will receive a confirmation message with a simultaneous flashing of the white and red
light, the ARX logo will be displayed on the screen for a second, and a beep will sound.
18